Quickstart & UnboxingUpdated 2 years ago

Watch this Video to Get Started with your New UniqueHeat^® and remember we have your back for the next Decade!

If you need further care of any kind, feel free to reach out at [email protected] or text us at 1-734-954-9283. We love to help! 

Always remember, the Decade of Care Experience means we got you covered for the next Decade!  🥰

Welcome, and who doesn't love a good old fashioned unboxing video?

You want to find a level and unobstructed location to place and unpack your heater.

Just pop the sealed tape here at the top and at both ends.

Right on the top, you'll find a clear plastic bag that will include your manual and remote.

If your remote is not included in the manual bag, it will be located on the top of the Styrofoam insert in its little remote cutout.

Next, make sure when you pull your Styrofoam insert out the first time that you put your fingers in the grass poles and pull straight up. Your unit below is wrapped in a plastic bag and if you pull too fast, you'll create a suction of air that can break the top of your Styrofoam piece.

Next, to pull your heater out, reach in with both of your hands on both sides and you'll feel the carrying handles. Just grab it and lift straight up.

Pull the main plastic bag off your unit and place them inside your box for future storage should you need them. We strongly recommend keeping your packaging for any off season storage or for transportation needs. You want to make sure to keep your box and the two inserts in a safe and dry place.

Next, your heater comes with a six-foot cord. It has a Velcro Strap so you can easily wind it up for summer storage.

Plug the power cord directly into an unused 110-Volt 15-Amp grounded plug.

Press the power button on the control panel or on your remote control to activate your heating system. To turn off your heating system. Press the power button again. Now note, the fan will continue to run until all of the heat has been expelled.

Now let's talk about the display settings.

This heater is equipped with three temperature scale settings, 1 through 20 Fahrenheit and Celsius.

To change between the scales. Hold down the quiet button for 3 seconds until it beeps and a display flashes. Then release the quiet button, pressing the timer button, then it will switch between the different scales. Pressing the quiet button again or waiting for 5 seconds will set the selected scale.

Now we recommend for most of our customers to use the 1 through 20 setting.

Now let me show you how easy it is to use the auto off and on timer. When would you use this? A great example is setting your heater before you leave in the morning to turn on a couple of hours before you get home from work or the kids get home from school. Let's start with having your heater automatically turn on when it's off.

With the heater off, press the timer button to select the number of hours you want the heater to wait until it powers on. You can select between 1 and 12 hours. The heating system will power on to the last heat setting that it was operated at.

Now let's see how easy it is to set your heating system to automatically turn off.

With the heating system on, press the timer button to select the number of hours you want the heater to operate until it turns off. You can also select between 1 and 12 hours. This is a great feature to use before bed. We personally don't heat load our bedroom until it's time to go to bed. I push the one-hour timer button and then I set the heater inside of our bedroom while getting ready for bed. It provides the perfect amount of heat for us while we sleep.

Now, to disengage the timer button completely, simply press the power button or press the timer button until the time is no longer indicated on the display.

Last but not least, let's talk about the quiet mode power saving setting.

Any time your heater is running, press the quiet button and your heater will reduce down to 900 watts and your already quiet fan will run even quieter. This feature is great for watching TV or resting.

Now to care for your cabinet, just simply wipe it with a clean, soft, damp cloth. And when it comes to storing your heater for an extended period of time, unplug your heater and wind up the electrical cord and use the Velcro attachment located on the cord to keep it off the ground.

It's highly recommended that you use the original package as the most optimized way to store your heater. 

Thank you for taking the time to watch this video.